How to set up a negative test using eValid

How to apply eValid to functional testing of web applications.

How to set up a negative test using eValid

Postby ValBaum » Wed Apr 25, 2018 1:13 pm

Good Afternoon.

How does one set about doing a "negative test" -- one that proves that something is not true?

Any recommendations or suggestions?


Thanks
ValBaum
 
Posts: 1
Joined: Wed Apr 25, 2018 1:06 pm

Re: How to set up a negative test using eValid

Postby eValid » Thu Apr 26, 2018 11:38 am

ValBaum wrote:Good Afternoon.

How does one set about doing a "negative test" -- one that proves that something is not true?

Any recommendations or suggestions?


Thanks


An interesting question ValBaum.

This is not an unusual situation.

Whenever a test reveals a behavior that is incorrect then that is a "negative test".

If you already have that script in hand, you're home free: you have a "negative" test right there.

The other part of your questions, how to prove that something is not true is a little bit more difficult.

Sorry, that is something of an understatement because to show something is NOT true in general is impossible.

Al you can really say is whether something specific is true or NOT true.

The point is, you have to have something SPECIFIC in mind and then testing techniques will let you confirm or deny if that SPECIFIC fact is OK.

A good example is, "validate selected text" -- this is a common thing to verify.

Here is the manual page for that command, which, in addition WAITS for that particular fact to be true.

http://e-valid.com/Products/Documentati ... .text.html

Hope this helps!


-- eValid Support
eValid
 
Posts: 2392
Joined: Tue Jan 01, 2008 12:48 pm
Location: USA


Return to Desktop and Mobile Device Functional Testing

Design Downloaded from free phpBB templates | free website templates | Free Web Buttons