Explaining timeouts and time limits during monitoring mode

Applying eValid to Rich Internet Application (RIA) Performance Monitoring.

Explaining timeouts and time limits during monitoring mode

Postby AlbertL » Thu Apr 23, 2020 10:05 am

Morning.

How do the timeouts and time limits work in eValid during monitoring mode?

Thanks
AlbertL
 
Posts: 1
Joined: Thu Apr 23, 2020 10:02 am

Re: Explaining timeouts and time limits during monitoring mo

Postby eValid » Fri Apr 24, 2020 11:19 am

AlbertL wrote:Morning.

How do the timeouts and time limits work in eValid during monitoring mode?

Thanks


Thanks for posting your question AlbertL.

The timer limits apply in producing alarm signals from the browser doing the monitoring, as described here:

http://e-valid.com/Products/Documentati ... alarm.html

The alarms are generated when any of the internal timing limits are exceeded based on the values that are set here:

http://e-valid.com/Products/Documentati ... yback.html

Please be aware that a constructed synchronization step also respects the limits specified here:

http://e-valid.com/Products/Documentati ... ation.html

Overall, the maximum step time might take effect if you slow playback down too much.

Hope this answers the question.


-- eValid Support
eValid
 
Posts: 2392
Joined: Tue Jan 01, 2008 12:48 pm
Location: USA


Return to Rich Internet Application Monitoring (RIA)

Design Downloaded from free phpBB templates | free website templates | Free Web Buttons