How to make the batch file & the windows scheduled task?

[antfau]

I made evs scripts for 6 applications, one script per application. Is it
ok to make 1 batch file to run all 6 scripts at the same time
simultaneously, say , once every hour -- Or should I make a different
batch file for each script , and have each batch file ran, say 10
minutes apart, every hour?

I already know how to make the batch file and the windows scheduled task
timer. Thanks

[monitoring]

Yes, assuming you have the MULT and BATCH features active, then
you can launch as many eValid playbacks at the same time as your
machine will allow.

You can have a single batch file (you may want to use the START
command in the batch file to launch operations independently), or you
can run the eValid commands serially.

Or, you can have separate batch files, too.

The scheduler in Windows is a very good way to control periodic
launching of batch commands (which then launch eValid playbacks).
In "monitoring mode" we generally recommend use of the scheduler.

http://www.e-Valid.com/Products/Documentation.9/Monitoring/nt.scheduler.html

Here are some additional items to consider...

Here are basic user recommendations that should be followed to
assure the maximum benefit from eValid when used in monitoring mode:

http://www.e-Valid.com/Products/Documentation.9/Monitoring/recommendations.html

If you are trying to run a large number of eValid playbacks, you need
to be aware of the possibility of inducing a cascading failure:

http://www.e-Valid.com/Products/Documentation.9/Monitoring/cascading.failure.html

Lastly, eValid V9 has the ability to trap nearly every kind of
operational exception:

http://www.e-Valid.com/Products/Documentation.9/Reporting/issues.html